Industrial Lubricants

HeavyTec

Hydraulic and circulating system lubricants

 

HeavyTec Utility GP, ISO 32 / 46 / 68 / 100 / 150 / 220

High quality lubricants for use in a wide range of applications, such as circulating systems, vacuum pumps, gear units where no high pressure additives (EPs) are required, bearings and hydraulic systems of lower requirements.

Cover the specifications: DIN 51524 Part 1 HL, DIN 51517 Part 1 C, DIN 51506 VC, ISO 6743-3 HL etc.

 

HeavyTec Hydraulic HM, ISO 22 / 32 / 46 / 68 / 100

Reinforced lubricants with thermal and oxidative stability additives for hydraulic and circulating systems with particular resistance to wear and oxidation.

Cover the specifications: DIN 51524 Part 2 HLP, ISO 6743-4 HM etc

 

HeavyTec Hydraulic HV, ISO 15 / 32 / 46 / 68 / 100

Extra-reinforced lubricants with a very high viscosity index, especially for the requirements of modern hydraulic systems, operating at low ambient temperatures or under great temperature changes.

Cover the specifications: DIN 51524 Part 3 HVLP, ISO 6743-4HV etc.

 

HeavyTec Hydraulic ZF, ISO 32 / 46 / 68

Special technology zinc free hydraulic lubricants, with excellent filter permeability, suitable for engines with mechanical parts made of bronze.

Cover the specifications: DIN 51524 Part 2 HLP, ISO 6743-4 HM etc.

 

HeavyTec Hydraulic ZF-HV, ISO 32 / 46 / 68  

Special technology zinc free hydraulic lubricants, with high viscosity index and excellent filter permeability, suitable for engines with mechanical parts made of bronze.

Cover the specifications: DIN 51524 Part 3 HVLP, ISO 6743-4 HV etc.

 

HeavyTec Hydroclear HM series 7, ISO 32 / 46 / 68

Specially filtered high-purity lubricants (Class 7 according to NAS 1638) with thermal and oxidative stability additives for hydrostatic systems with particular resistance to wear and oxidation.

Cover the specifications: DIN 51524 Part 2 HLP, ISO 6743-4 HM, NAS 1638 Class 7 etc.

 

HeavyTec Hydroclear HV series 7, ISO 32 / 46 / 68

Specially filtered high-purity lubricants (Class 7 according to NAS 1638) with thermal and oxidative stability additives and very high viscosity index, for hydrostatic systems with particular resistance to wear and oxidation.

Cover the specifications: DIN 51524 Part 3 HVLP, ISO 6743-4 HV, NAS 1638 Class 7 etc.

 

HeavyTec Hydrofluid HFC, ISO 46

Synthetic nonflammable hydraulic glycol-water lubricant for use in hydraulic systems where there is a risk of spillage in the event of leakage.

Covers the specifications: 7th LUXEMBOURG REPORT, ISO 6743-4 HFC, ISO 12922 etc.

 

HeavyTec Turbo T, ISO 32 / 46 / 68 / 100

High quality lubricants for lubrication of steam turbines, gas turbines and hydro turbines.

Cover the specifications: ISO 6743-5 TSA/TSE/TGA/TGB/TGE etc.

 

                                                              Reduction gear lubricants

HeavyTec Gear XP, ISO 68 / 100 / 150 / 220 / 320 / 460 / 680 / 800 / 1000

Lubricants with high pressure additives, for gears lubricated by immersion, circulation and spraying.

Cover the specifications: DIN 51517 Part 3 CLP, ISO 12925-1 CKD etc.

 

HeavyTec SynGear XP-PG, ISO 150 / 220 / 320 / 460

Synthetic polyglycol based lubricants suitable for lubrication of gears and bearings operating at high temperatures and loads.

Cover the specifications: DIN 51517 Part 3 CLP, ISO 12925-1 CKD/CKT etc.

 

HeavyTec Synthetic HT-GP, ISO 68 / 150 / 220 / 320 / 460

Synthetic polyalphaolefin based lubricants suitable for lubrication of circulating systems, gearboxes and bearings operating at high temperatures and high speeds.

Cover the specifications: DIN 51517 Part 3 CLP, ISO 12925-1 CKD etc.

 

 

Compressor/ air tool lubricants  

 

HeavyTec Compressor VDL, ISO 32 / 46 / 68 / 100 / 150

High quality lubricants for rotary and reciprocating air compressors with particularly high output temperatures (up to 220 oC).

Cover the specifications: DIN 51506 VDL, ISO 6743-3 DAH (32 to 68), ISO 6743-3 DAB (100 to 150) etc.

 

HeavyTec Compressor Synthetic, ISO 32 / 46 / 68

Synthetic polyalphaolefin based lubricants, for screw and reciprocating air compressors operating for long periods under particularly unfavorable conditions.

Cover the specifications: DIN 51506 VDL, ISO 6743-3 DAJ etc

 

HeavyTec Compressor S-DE, ISO 68 / 100

Synthetic diester based lubricants, for use in all air compressors and vacuum pumps operating under conditions of conditions of high temperatures and operating pressures.

Cover the specifications: DIN 51506 VDL, ISO 6743-3 DAJ etc.

 

HeavyTec Compressor S-AB, ISO 68 / 100

Top technology synthetic lubricant based on alkylbenzene and specially selected additive package for lubrication of reciprocating and rotary air compressors working under harsh operating conditions.

Cover the specifications: DIN 51503 KC/KE, ISO 6743-3 DAJ etc.

 

 

HeavyTec FRZ SYN-POE, ISO 32 / 46 / 68 / 100

Synthetic POE (polyol ester) based lubricants designed for use in refrigeration compressors using alternative refrigerants such as R-134a and many HFC (hydro fluorocarbon) such as R-404, R-407c, R-410a, R-507, R-509a/b, as well as in extremely low temperatures.

Cover the specifications: ISO 6743-3 DRD etc.

 

HeavyTec FRZ, ISO 32 / 46 / 68

Naphthenic based lubricants, designed for refrigeration compressors using ammonia as refrigerant (R-717), Freon R-12, R-22, R-502.

Cover the specifications: DIN 51503 KC,ISO 6743-3 DRA etc.

 

HeavyTec Rock Drill D, ISO 32 / 46 / 100

Reinforced lubricants with antioxidant properties for lubricating pneumatic air tools, such as airbrushes and compressors.

Cover the specifications: ISO 6743-11 P etc.

 

 

 

                                                  Lubricants for metalworking machines

 

HeavyTec Emulcut ABS

Soluble metal cutting and processing lubricant that forms a stable emulsion with water and reduces the growth of bacteria. Conventional solutions from 30: 1 to 20: 1.

Covers the specification: ISO 6743-7 MAD etc.

 

HeavyTec Clearcut STR

Synthetic technology product that forms a stable translucent emulsion with water, offers stable solutions of long duration and excellent surface quality.

Conventional solutions depending on the process and the metal from 50:1 to 10:1.

Covers the specification: ISO 6743-7 MAF etc.

 

 

 

HeavyTec Steelcut NC, ISO 22 / 32

Special non-emulsifying metal cutting lubricants (Neat Cutting Oil) with breaking stress of up to 100 Κp/mm² , for use as lubricant or hydraulic fluid in slides and machine tools.

Cover the specification: ISO 6743-7 MHE etc.

 

HeavyTec Slideway CG, ISO 68 / 220

High quality lubricants for lubrication of slides and machine tool tables.

Cover the specification: DIN 51502 CGLP, ISO 6743-13 GB etc.

 

 

Lubricants of special applications

 

HeavyTec Isoquench L

High quality lubricant with low evaporation tendency, suitable for steel dyeing and metal cooling.

Covers the specification: ISO-L-UHB etc.

 

HeavyTec Transtherm Q

High quality lubricant with high oxidation stability, for use in closed liquid phase heat transfer systems (oil heating) where the liquid mass temperature reaches up to 320 oC.

Covers the specification: ISO 6743-12 L-QB, DIN 51522 Q etc.

 

HeavyTec Syntherm SQ

100% synthetic lubricant of low viscosity, for closed heat transfer systems, wherein the liquid mass temperature reaches up to 325 oC.

Covers the specification: ISO 6743-12 L-QD, DIN 51522 Q etc.

 

HeavyTec Isovolt J

Special lubricant with oxidation inhibitor and special composition, for use in electrical applications in all types of transformers.

Covers the specification: IEC 60296:2012 etc.

 

HeavyTec White Oil M, ISO 15 / 68

High purity Medicinal White Oil with high chemical stability, for use in food industries (bakery, beverage bottling, etc.), pharmaceutical and cosmetic industries and lubrication of medical equipment.

Covers the specification: FDA 172.878 / 178.3620 (a) etc.

 

HeavyTec White Oil Τ, ISO 15

High refining and absolute purity White Mineral Oil with high chemical stability for industrial use.

Covers the specification: FDA 172.878 / 178.3620 (a) etc

 

HeavyTec Textile Oil, WLV / WMV / WG

High quality leached lubricants designed to lubricate needle mechanisms in flat & circular knitting machines.

 

HeavyTec Mould Oil SE-7

High quality mold release lubricant, specially designed in the presence of a special solvent and release agents, to provide easy mold release and excellent surface finish to end products.

 

HeavyTec Utility PM, ISO 150 / 220 / 320

Reinforced ashless lubricants with special high pressure additives & excellent load-carrying capacity designed for high performance paper making machines.

Cover the specification: DIN 51517 Part 3 CLP, ISO 12925 CKD, VOITH, METSO, SKF, FAG etc.

 

 

 

 

 

GreaseTec

 

Greases

 

 

GreaseTec Lithium, NLGI 2 / NLGI 3

Multi-purpose Lithium based grease (Li), suitable for general lubrication of vehicles and industrial applications.

Operating temperatures: -30 οC to +130 οC.

Cover the specifications: DIN 51825 K/K-30, ISO LB/GB κ.ά.

 

GreaseTec Lithium EP, NLGI 00 / 1 / 2 / 3

Multi-purpose Lithium based grease (Li), reinforced with high pressure additivesν (ΕΡ) for resistance to heavy loads and impacts.

Operating temperatures: -30 οC to +130 οC.

Cover the specifications: DIN 51825 KP/K-30, ISO LB/GB etc.

 

GreaseTec Lithium Moly, NLGI 2

Lithium-based grease (Li), reinforced with molybdenum disulphide (MoS2), for high load and high moisture content applications.

Operating temperatures: -30 οC to +130 οC.

Covers the specifications: DIN 51825 KPF2N-30, ISO LB/GB etc.

 

GreaseTec LiCal EP, NLGI 2

Multi-purpose Lithium-Calcium based grease, with high pressure additives and polymeric components, exhibits very high resistance to leaching, load strain, wear, oxidation and corrosion.

Operating temperatures: -30 οC to +140 οC.

Covers the specifications: DIN 51825 KP2N-30, ISO LB/GB etc.

 

GreaseTec CSX, NLGI 2

High performance calcium sulfonate complex grease with anti-corrosion and antioxidant additives as well as reinforced with high pressure additives, which offer unique properties in applications of high loads, high temperatures and high humidity.

Operating temperatures: -25 οC to +180 οC.

Covers the specifications: DIN 51825 KP2R-25, ISO LB/GC etc.

 

GreaseTec Lithium X, NLGI 1 / 2 / 3

Multi-purpose LithiumComplex greases with high pressure additives (EP), with high resistance to leaching, wear, oxidation, corrosion and especially high temperatures.

Operating temperatures: -25 οC to +200 οC.

Cover the specifications: DIN 51825 KP2R-25, ISO LB/GC etc.

 

GreaseTec Liplex Blue 23, NLGI 2/3

High technology Lithium complex based multifunctional grease (NLGI 2/3) with high pressure additives (EP) and anti-corrosion and antioxidant additives that offer unique properties across a wide range of applications.

Operating temperatures: -30 οC to +200 οC.

Covers the specifications: DIN 51825 KP2.5R-30, ISO LB/GC etc.

 

GreaseTec ΒΝΤ, NLGI 2

Special bentonite grease for bearings and sliding bearings where the high temperature makes it impossible to use conventional grease. 

Operating temperatures: -20 οC to +160 οC.

Covers the specifications: DIN 51825 K2N-20, ISO LB/GB etc.

 

GreaseTec Calcium, NLGI 2

Calcium based lubricant exhibits great adhesion and resistance to leaching.

Operating temperatures: -20 οC to +90 οC.

Covers the specifications: DIN 51825 K2C-20 etc.

 

 

GreaseTec CG, NLGI 2

Calcium based lubricant with anti-corrosion and antioxidant additives as well as graphite-enhanced, offering unique properties in applications with high loads and strong moisture.

Operating temperatures: -30οC to +90 οC.

Covers the specifications: DIN 51825 GF2E-30 etc.

 

GreaseTec Lithium Cott, NLGI 00

Semi-fluid Lithium based lubricant, of green color, specially formulated to lubricate the cotton harvester shaft.

Operating temperatures: -30 οC to +130 οC.

Covers the specifications: DIN 51826 GP00G-30 , GOG: 1035/85 etc.

 

GreaseTec FGAX, NLGI 2

Special food grease designed with specially formulated synthetic lubricants and aluminum compound thickener, according to the strict H1 requirements of the Institute of Food.

Operating temperatures: -35 οC to +140 οC.

Covers the specifications: DIN 51825 KPF2K-35 , NSF H1 etc.

 

GreaseTec Synplex 222, NLGI 2

Synthetic Lithium complex lubricant with anti-corrosion and antioxidant additives as well as high pressure additives that give it unique properties in difficult applications where a long life product is required.

Operating temperatures: -40 οC to +220 οC.

Covers the specifications: DIN 51825 KPHC2P-40, ISO LB/GC etc.

 

 

                                                MultiTec

Special products

 

MultiTec LHM Plus

High technology hydraulic fluid (green), designed with special additives that meet the high demands of centralized hydraulic systems (suspensions, shock absorbers, control systems and hydro-pneumatic suspensions).

Covers the specifications: PSA B71 2710, New Holland NH 610A, ISO 7308, Ford ESN M6C 59A, FIAT 9.55597, IVECO 18-1823, Massey Ferguson MF 1151 etc.

 

MultiTec 2T Low Smoke

Synthetic technology lubricant for two-stroke engines of multiple applications, with low emissions of smoke. Conventional mixing ratios: 2% to 5%.

Covers the specifications: API TC, JASO FC, ISO-L-EGC etc.

 

MultiTec Protogen N 10, N 30

Primary general purpose lubricant without chemical additives. It protects the metal surfaces from corrosion and rust.

 

MultiTec Antifreeze Concentrated

Top technology condensed anti-freeze-based heat-resistant liquid based on ethylene glycol and special chemical additives with excellent antirust properties for cooling circuits (cars, trucks and machinery).                

Covers the specifications: BS 6580:2010, ASTM D 3306 /D 4985, SAE J 1034, AFNOR NF R15-601, VAG G11  etc.

 

MultiTec Paraflu Extra

Ready-to-use, ethylene glycol-based anti-freeze/ heat-resistant fluid, with special additives with excellent anti-rust properties, for cooling circuits (cars, trucks and machinery).

Produced by condensed liquid cooling circuit of internal combustion engines, according to the BS 6580:2010.               

Offers antifreeze protection up to -17 ºC and anti-heat protection up to +107 ºC.

Covers the specifications: BS 6580:2010, ASTM D 3306, AFNOR NF R15-601 etc.

 

MultiTec Paraflu Ultra Plus

Ready-to-use, ethylene glycol-based antifreeze/ heat-resistant fluid, with special additives with excellent anti-rust properties, for cooling circuits (cars, trucks and machinery).

Produced by condensed liquid cooling circuit of internal combustion engines, according to the BS 6580:2010.               

Offers antifreeze protection up to -37 ºC and anti-heat protection up to +129 ºC.

Covers the specifications: BS 6580:2010, ASTM D 3306, SAE J 1034, AFNOR NF R15-601 etc.

 

MultiTec Antifreeze LLC (G12+)

High technology consensed ethylene glycol-based antifreeze/ heat-resistant fluid, with innovative synthesis of organic acid additives (ΟΑΤ – Organic Acid Technology).

Offers great intervals of change from 4 to 5 years or 120.000 Km to 150.000 Km .

Covers the specifications: BS 6580:2010, ASTM D 3306 /D 4985, SAE J 1034, AFNOR NF R15-601, VAG G12+ etc.

 

MultiTec Ready Long Life Coolant (G12+)

Ready-to-use anti-freeze/ heat-resistant fluid (50% v/v with water) with innovative synthesis of organic acid additives (ΟΑΤ – Organic Acid Technology ).

Offers antifreeze protection up to -38 ºC and anti-heat protection up to +128 ºC.

Covers the specifications: BS 6580:2010, ASTM D 3306 /D 4985, SAE J 1034, AFNOR NF R15-601, VAG G12+ etc.

 

MultiTec Brake & Clutch Fluid DOT-4

Synthetic fluid for hydraulic brake systems and vehicle clutches, requiring DOT-3 or DOT-4 specification.

Covers the specifications: ISO 4925, FMVSS No 116 DOT-4 & DOT-3, SAE J 1704 / J 1703 etc.

 

MultiTec Diesel Flow Improver

Special additive that has the ability to reduce the crystallizing point of oil and also improve its flow capacity, even at a temperature -16 oC.

It is added to anti-icing /oil ratio  0.75 L: 1000L.

 

MultiTec Winter Screenwash

Special winter windscreen cleaner, with anti-icing protection of the washer (up to -20 ºC ambient temperature).

 

MultiTec Summer Screenwash

Special windscreen cleaner, with powerful insect cleansers.

 

MultiTec AdBlue®

High purity urea solution in deionized water, designed internationally with the characterization AUS-32

 (solution of urea in water 32.5% ) .

The product has been developed for use as a reagent in Diesel engines with a catalyst technology SCR (Selective Catalytic Reduction) to reduce the emission of nitrogen monoxides ( ΝΟx ).

Covers the specifications: DIN 70070, ISO 22241, CEFIC Standards etc.